Insignia NS-19LCD, User Manual

Page: 12 / 72

12
Insignia NS-19LCD 19” LCD TV
www.insignia-products.com
3 Press the ENTER , VOL+ , or VOL– button to
open the Channel menu.
4 Press the CH+ or CH– button one or more
times to select Fine Tune .
5 Press the VOL+ or VOL– button one or more
times to adjust the picture and sound.
Changing channels
To change the channels:
• Press the CH+ or CH– button one or more
times to select the channel you want.
• To select a one-digit channel number,
press the number button for the channel,
then press the
ENTER button or wait a
few seconds.
• To select a two-digit channel number,
press the two number buttons in
sequence, then press the
ENTER button
or wait a few seconds.
• To select a three-digit channel number,
press the three number buttons in
sequence.
Adjusting the volume
To adjust the volume:
• Press the VOL+ or VOL– button to
increase or decrease the volume.
• Press the MUTE button to mute sound.
Press the button again to restore sound.
Selecting a menu language
To select a menu language:
1
Press the MENU button to open the OSD.
2 Press the CH+ or CH– button one or more
times to select Display .
3 Press the ENTER , VOL+ , or VOL– button to
open the Display menu. Language is
highlighted.
4 Press the ENTER , VOL+ , or VOL– button
one or more times to select English , French ,
or Spanish .
Using preset picture mode
To use the preset picture mode:
1
Press the MENU button to open the OSD.
2 Press the CH+ or CH– button one or more
times to select Picture .
3 Press the ENTER , VOL+ , or VOL– button to
open the Picture menu. Picture Mode is
highlighted.
4 Press the ENTER , VOL+ , or VOL– button to
select the picture mode you want. You can
select:
• Bright –Select for a bright picture.
• Soft –Select for a finely detailed picture.
• Standard –Select for a normal picture.
• User –Select to use picture settings you
have customized. For more information
about the settings you can customize, see
“Customizing the picture” on page 12.
You can also press the PICTURE button to
select a picture mode.
Customizing the picture
To customize the picture:
1
Press the MENU button to open the OSD.
Picture is highlighted.
2 Press the ENTER , VOL+ , or VOL– button to
open the Picture menu.
3 Press the CH+ or CH– button one or more
times to select the option you want to adjust.
Note
If you manually fine-tune a program, the AFC option turns off.
Note
To watch a channel that has been erased from the channel list,
you must use the number buttons to tune the channel.