Insignia NS-19LCD, User Manual

Page: 10 / 72

10
Insignia NS-19LCD 19” LCD TV
www.insignia-products.com
Connecting a DVD player using
component video
To connect a DVD player using component
video:
1
Plug the Y, Pb, and Pr connectors on a
component video cable into the Y, Pb, and Pr
IN jacks on the back of your TV.
2 Plug the other ends of the cable into the Y,
Pb, and Pr OUT jacks on the DVD player.
The jacks on the DVD player may be labeled
Y, Cb, and Cr.
3 Plug the right (red) and left (white)
connectors on a standard audio/video cable
into the right (red) and left (white)
COMPONENT IN audio jacks on the back of
your TV.
4 Plug the audio connectors on the other end
of the audio/video cable into the audio OUT
jacks on the DVD player.
To play a DVD:
1
Turn on your TV.
2 Press the INPUT button one or more times to
select YPbPr .
3 Turn on the DVD player.
4 Insert a DVD disc, then press the Play
button.
Connecting a PC
To connect a PC:
1
Plug a D-Sub cable into the D-Sub IN jack on
the back of your TV.
2 Plug the other end of the D-Sub cable into
the D-Sub OUT jack on the computer.
3 Plug an audio cable into the D-Sub LINE IN
jack on the back of your TV.
4 Plug the other end of the audio cable into the
audio out jack on the computer.
To view the computer screen on your TV:
1
Turn on your TV.
2 Press the INPUT button one or more times to
select D-Sub .
3 Turn on your computer, and check your
computer system requirements. See your
computer documentation for more
information.
4 Adjust the screen resolution and other
settings on your computer, if necessary.
Using your TV
Turning your TV on and off
To turn your TV on and off:
1
Make sure that the power cord is connected
to your TV and an electrical outlet.
2 Press the button to turn on your TV.
3 Press the button again to turn off your TV.
Selecting the TV source
To select the TV source:
1
Press the MENU button to open the
on-screen display (OSD).
2 Press the CH+ or CH– button one or more
times to select Channel .
Warning
Make sure that you turn off and unplug your TV before
installing devices.
Y=yellow (video)
W=white (audio left)
R=red (audio right)
Audio
D-Sub