background image

17 of 18

 

 
 
 

An Alliance Technology Company 

600 Dekora Woods Blvd.  Saukville, WI  53080

Toll Free: 800-488-8177     Local: 262-268-9330     Fax: 262-268-9952 

An Alliance Technology Company 

Self Leveling Camera 

 
This camera has a self-leveling feature that will position the camera so that the top of 
the pipe will appear on the top of the display. 
 
This is a color camera with LED’s for illumination of the pipe being inspected. 
 
The camera module has an integrated auto iris feature, which will automatically 
adjust for varied light levels. 
 
The Sonde is not built into the camera. 
 
This camera is intended for operation in pipes 2-12” I.D. 
 
This camera will function with any of our Xpress command modules as well as 
our Silver Bullet or Universal Jetcam systems. 
 
Diameter is 1.30” 

 
 

Sonde/Spring Assembly 

 
The removable sonde is located inside the spring assembly 
 
It continually transmits a signal at 512Hz and can be located with any locator capable 
of picking up a 512Hz signal. 

 

Skid Set 

 
The skids are intended to protect the camera from damage due to debris in the pipe 
being inspected. 
 
The standard skids come in two sizes. 

 

The small skid is for use in 3-4” diameter pipes. 

 

The large skid is for use in 4-6” diameter pipes. 

 

 
 
 
 

Summary of Contents for DVDXPRESS



















Reviews: