INSIGHT CCTV EDVR User Manual Download Page 70

Page: 70 / 96

TIME RECORD SETUP

InSight EDVR User's Manual

Highlight TIME RECORD SETUP in the main menu and press the enter button. The TIME RECORD
SETUP screen will be displayed.

Figure 63 – TIME RECORD SETUP. Figure 64 – TIME RECORD SETUP –

SPEED AND QUALITY.

The TIME RECORD SETUP screen displays recording settings for Day, Night and Weekend.

Highlight the heading for DAY, NIGHT, or WEEKEND and press the enter button to toggle
between ON and OFF.

You can set up the recording speed and select the recording quality between LOW, NORMAL, HIGH and
HIGHEST.

NOTE: To select the recording speed, use the

▲

▼

buttons in the sub-menu.

g p

You can change the certain details by highlighting the DETAIL(

▶

) button and pressing the enter button.

ST Series

Summary of Contents for EDVR

































































































Search results

Summary of Contents for EDVR

Reviews:

Related manuals for EDVR

Brands by name

Popular brands

INSIGHT CCTV EDVR, User Manual

Search results

Summary of Contents for EDVR

Reviews:

Related manuals for EDVR

Brands by name

Popular brands