SPOT SETUP
Digital Video Recorder
Your DVR can set up 3 spot monitors and assign cameras to each spot. Highlight the SPOT SETUP in the
main menu and press the enter button. The following SPOT SETUP screen will appear.
Figure 58 – SPOT SETUP.
You can turn on or off the Rotation for the assigned cameras for each spot Turn on or off the SEQUENCE
You can turn on or off the Rotation for the assigned cameras for each spot. Turn on or off the SEQUENCE
by highlighting the box below SEQUENCE and pressing the enter button.
You can assign cameras to each spot by highlighting the box below and press the enter button.
You can select cameras by checking the camera numbers on the popup screen. Refer to the Figure 59 –
SPOT SETUP(2).
Also, you can assign default camera to each spots.
You can set up the rotating dwell time by highlighting the box below I and pressing the enter
button. It can be set up to 256 seconds.
When turning on Popup, channels that are having events will be popped up to the assigned spot monitor.
NOTE: Same cameras can’t be shown on the spot monitors at the same time. When selecting
ROTATE-ON and all cameras for all of 3 spots, the spot 1 will display camera number 1, spot 2 –
camera number 2 and spot 3 – camera number 3 When selecting ROTATE – ON all cameras for all
camera number 2 and spot 3 – camera number 3. When selecting ROTATE – ON, all cameras for all
of 3 spots will be affected by the different time interval in rotating the cameras.
65
ST Series
