Chapter 4 — Quick Guide
InSight EDVR User's Manual
4.1 How to Install
Install a Hard Disk Drive to your DVR after opening the upper case.
Connect cameras to the Video In No. 1 ~ 16.
Connect a Monitor to the Main(CCTV) or VGA. (If necessary, connect the spot monitor to the Spot A, B or
C).
Connect a Network cable to the Ethernet port
Connect a Network cable to the Ethernet port.
Turn on the power sources for cameras, monitor and DVR.
Your DVR will be initialized and it will take approximately 150 seconds. As soon as the DVR completes its
initialization process, it will begin showing live video on the attached monitor. The default mode is to display
all cameras at once. Pressing any camera button will cause that camera to display full screen. It displays
live video until the user enters another mode. The default mode for audio is mute on. Please turn off the
audio mute to play live audio.
NOTE: Refer to the Chapter 3 - Installation for more details.
4.2 Common User Interface
Icon
Remarks
Button that allows to changes individual channel setting such as 1 – 4 -> 5 – 8
-> 9 – 12 -> 13 – 16 range.
All
t
h
ll h
l
tti
l t d t INSTALL
Allows to change all channel setting related to INSTALL.
Button that shows the list of items for setting
Saving button to change the setting value to take into affect
Cancel b tton not to change the setting al e to re ert to pre io s setting
24
ST Series
Cancel button not to change the setting value to revert to previous setting
