35
GB
Error messages
In the event of an error, one of the following
error messages will be shown on the display:
Faults Description
Err1
Computer is not receiving a
signal
Err3
Excess voltage
Err4
Excess current
Err5
The user is too heavy
Err6
Fault in motor connections
Err7
Control box is not receiving a
signal
SAFE
Safety lock
Cleaning and maintenance
Vacuum or wipe the treadmill down regularly
with a well-wrung cloth.
Unplug the treadmill. Open the motor cover
and remove any dust from the motor and
sensor.
Check the condition of the treadmill regularly
and tighten any bolts, screws and nuts as
necessary.
Lubrication
If the belt begins to run stiffl y, and it is not
because the belt is incorrectly tightened, it
should be lubricated using silicone oil.
Unplug the treadmill and lubricate the plate
beneath it using silicone oil.
Allow the belt to run unloaded for 3 minutes
to distribute the silicone oil.
If the belt runs unevenly
During operation, the belt may run to the
right or left if one of your legs is stronger
than the other. Always try to run in the
middle of the belt.
If the belt drifts to the left, loosen the left
adjustment screw and/or tighten the right
adjustment screw.
If the belt drifts to the right, loosen the right
adjustment screw and/or tighten the left
adjustment screw.