38
MAC Filter
The MAC Filter allows you to specify which devices can access the Jetpack Wi-Fi network.
ON/OFF
— Turns the MAC Filter ON/OFF. Before turning on, make sure that the
Allowed Devices
list
is not empty. When turning on, any Connected Device which is not in the Allowed Devices list will
immediately be disconnected.
•
Refresh
— Use to refresh the screen and delete any unsaved changes.
•
Add Device
— Use to add a new device to the devices list.
•
Save Changes
— Use to activate and save new settings.
To add a device to the device list:
➊
Click
Add Device
and enter the device name in the
Name
field.
➋
Select the device type from the
Type
dropdown menu and the MAC Address in the
MAC
Address field
.
➌
Select the
Blocked
and/or
MAC Address Filter
check box as required, then click
Save Changes
.
LAN
From LAN settings, you can manage your Jetpack’s network. These settings include:
•
IPv4
•
IP address
— The IP address for the Jetpack.
•
Subnet mask
— The subnet mask network setting for the Jetpack. The default value
255.255.255.0 is standard for small (class "C") networks. If you change the LAN IP Address,
make sure you use the correct Subnet Mask for the IP address range containing the LAN IP
address.
