NVS460 User’s Guide
Rev.1.0 (Sep. 2006)
9
9
9
9 of
of
of
of 51
51
51
51
Audio In
Ground
Not used
Audio In
Ground
Not used
Audio out
Ground
Not used
Audio out
Ground
Not used
Figure 2-3. Pin assignment of the plug for MIC/LINE In (left) and
LINE OUT (right)
LINE OUT
: Connect speakers with built in amplifier. Audio from remote site is output through
Line out in bi-directional audio mode.
Use Standard stereo earphone jack for the connection.
100BaseT
: 100Mbps Ethernet connector (RJ-45) with proprietary PoE.
- LINK LED : Continuous yellow light means that network cable is plugged in. It will flicker
when there is traffic.
- Status LED: Green color indicates that the camera is in normal operation mode, while RED
color indicates that the camera is in abnormal condition.
RS-232C & Video-out
3 Pins from the bottom of the connector are assigned for RS-
232 port, while the remaining 2
pins are used for checking composite video output. Please note that the bottom most pin is
numbered as 1.
Pin
Description
Misc.
1
TxD of RS-232C
For debugging & factory use only.
2
RxD of RS-232C
For debugging & factory use only.
3
Ground of RS-232C
For debugging & factory use only.
4
Video out from the camera
For use in installation.
5
Ground for Video out.
For use in installation
DC7-23V, 8W
:
Power input of NVS 460.
Do not apply power through this power input when power is applied through LAN cable using
proprietary PoE.
