NVS460 User’s Guide
Rev.1.0 (Sep. 2006)
40
40
40
40 of
of
of
of 51
51
51
51
System S/W
Upgrade
Upgrade the system software installed in the video server via
the network. System software needed for the upgrade can be
downloaded from Inscape Data’s home page.
Refer to
[6.4
.
How To Upgrade Your NVS 460 System]
.
Upgrade
Bootloader
Upgrade
Upgrade the bootloader installed in the video server via the
network. Bootloader needed for the upgrade can be
downloaded from Inscape Data’s home page.
Refer to
[6.4
.
How To Upgrade Your NVS 460 System]
.
Add PTZ File
Add a new PT driver software via the network. PT driver can be
downloaded from Inscape Data’s home page.
Refer to
[6.4
.
How To Upgrade Your NVS 460 System]
.
Factory
Default
Setting
Re-initialize the video server to factory default state.
By checking on a Radio button “Except Network Configuration”,
you can preserve the parameters for the network. Checking on
“All”, will return all the parameters to factory default state.
Once NVS 460 is re-initialized as factory default state, it
should be set-up again using IP-Installer.
System Reset
Perform remote reset by clicking the “CONFIRM” button.
All previous connections will be disconnected upon
reset. NVS 460
does not resume the connections and the
users must re-connect to the server manually.
