Inscape Data LinkPower LPS1800 Series, User Manual

Page: 27 / 59

Page 27
Revision 1.0
Firmware upgrade is complete, click the "Continue"
2.
TFTP upgrades
After the flash erase, in Microsoft's command line window to run a TFTP client program, here
assumes that the IP address is 192.168.2.1 for the equipment, input format: c: \ TFTP -i 192.168.2.1
put file path \ filename. Bin, press the return key. .As shown in figure:
Please log in again after the completion of systems
Note: The default update password is 123456.If return an error or the time for upgrading the
firmware update page is too long, please reconnect according to the login page text. Please make sure that
you don't shut off the power during flash erase and upgrade.
2.6 Reboot Device
Click directory [Reboot Device] of the left [Administrator], jump following
page