Inscape Data LinkPower LPS1800 Series, User Manual

Page: 21 / 59

Page 21
Revision 1.0
Chapter 1 Access Device
1.1
Access Method
Via the WEB login to the device configuration page, to conduct all the configuration management,
including switches port Settings and VLAN Settings, and so on through the WEB pages. You can
use a Web browser (it is recommended to use the Internet Explorer5.0 above).
1.2
Login Configuration
All network ports of this device support WEB management equipment, IP management by default
192.168.2.1, subnet mask: 255.255.255.0, the default gateway: 192.168.2.254. The administrator
of the PC as long as you can communicate with the equipment management.
Default IP Address: 192.168.2.1
Default login user : “ admin ” and login password : “ system ”.
1.3
User Login
Using Web page to login in your Web browser address bar and enter the following device IP address,
192.168.2.1.
(Note: When the maintenance administrator’s PC and the switch device are connected), press "Enter",
then below Log In screen will display: