NVS410 User’s Guide
-
-
-
- 31
31
31
31 -
-
-
-
5.7. Motion Region Setup
Set the motion detection regions. Up to 3 separate regions can be defined. After setup the motion detection
region, the corresponding selection in “Sensor & Capture Setup” ->“Video Capture Condition” -> “Motion
Detection Select” should be enabled, to activate the motion detection and generate the alarm condition.
"
Channel Selection
: Choose the channel you wish to enable the motion detection feature.
"
Channel Sensitivity
: Set the sensitivity in motion detection for each channel.
-
1 being the least sensitive and 66 is the most sensitive.
-
Sensitivity values can be set to different values among different channels, but same sensitivity is applied
for the regions within the same channel.
"
Motion Region Setup
: Set up to 3 motion detection region per each video channel
-
Region 1, 2, or 3
: Motion detection is enabled for the channels by checking each box.
Figure 5-9. Motion Region Setup