NVS410 User’s Guide
-
-
-
- 28
28
28
28 -
-
-
-
5.5. Sensor & Capture Setup
This is the setup page for conditions of video capture. The video capture can be triggered either by activated
alarm sensor or motion detection as setup by this page. When the sensor is triggered the event is ported to the
NVR100 Software. Captured video of the event is stored on the HDD of PC or FTP server.
Figure 5-7. Sensor & Capture Setup
"
Sensor Setup
: Up to 2 external sensors can be connected to the NVS410.
-
Type Selection
: Select sensor type. There are two sensor operating mode.
.
Normal Open
: Open circuit in normal operation. Closed circuit indicates alarm triggered condition.
.
Normal Close
: Closed circuit in normal operation. Open circuit indicates alarm triggered condition.
""""
Video Capture Condition
: It sets which sensor will trigger video recording for channels 1-2. The NVS410
supports 2 types of sensor event trigger.
1. Sensor : when at least one of the sensor detects a trigger event.