©
Inscale Ltd. 2011
p a g e
7
4.0
INSTALLATION
OF
THE
IBC
SERIES
•
The IBC Series comes with a stainless steel platform packed separately.
•
Place the platform in the locating holes on the top cover.
•
Do not press with excessive force as this could damage the load cell
inside.
•
Level the scale by adjusting the four feet. The scale should be adjusted
such that the bubble in the spirit level is in the centre of the level and
the scale is supported by all four feet.
•
Attach the power supply cable to the connector on the right side of the
scale base. Plug in the power supply module. The power switch is
located at the right side of the scale base.
•
The scale will show the battery voltage
“vol-X.X”
in the
“Unit Weight”
display .
•
Next a self-test is followed. At the end of the self-test, it will display
“0”
in all three displays, if the zero condition has been achieved.
