Inscale IBC-15, User Manual

Page: 16 / 20

© Inscale Ltd. 2011 p a g e
14
9.0
CALIBRATION
Remove all weight from the pan before beginning.
•
When in the normal weighing mode, hold [Zero] and press the [Tare] key to
enter the parameter menu as shown in section 9.0..
•
The display will show the revision number in the “Weight” display ,The “Unit
Weight”
display will show
"- - - - "
requesting the password number to be
entered.
•
The default password is
"0000"
but other numbers can be set using the
parameter menus. Press the [0] key four times. The display will jump to the
first parameter.
"FILt ?"
with the Unit weight window showing the current
filter setting.
•
Press [M+/
↵ ↵↵ ↵
] 8 times until the display shows
““““CALI”.
Note that the display will
also show
““““CALI” “Unit ?” “ xx”
for selecting the unit of weight to be used
when calibrating after 6 presses. Ignore this function unless yu want to
change the weighing unit during calibration.
•
Press the numeric keys to enter the calibrate mass value. For kilograms and
pounds enter the value as a number, for example “3” for 3 kilograms. For
grams enter the weight in grams, i.e. “1000” grams.
•
Place the calibration mass on the weighing platform.
The suggested calibrate values for all model :
However any whole value of weight can be used by entering the correct value.
•
Press the [M+/
↵ ↵↵ ↵
] key ,
•
The display will show “
PASS”
,
•
Press the [M+/
↵ ↵↵ ↵
] key to return to normal weighing.
•
If the calibration is outside of the previous calibration value by more than
5% ,it will show
“FAIL L”
or
“FAIL H”
indicating the new calibration weight
was too low(FAIL L) or too high (FAIL H) in respect to the previous
calibration value.
LBC 3 LBC 6 LBC 15 LBC 30
2kg or 3kg 5kg or 6kg 10kg or 15kg 20kg or 30kg
5lb or 6lb 10lb or 12lb 20lb or 25lb 40lb or 50lb