©
Inscale Ltd. 2011
p a g e
12
7.6
ACCUMULATION WHEN IN PARTS COUNTING
•
When in parts counting mode, the values (weight and count) shown on the
display can be added to the values in the accumulator by pressing the
[M+/
↵
↵↵
↵
]
key. The
“Weight”
display will show the number of times. The
“Total”
display
will show the total accumulated count.
•
More products can then be added and the
[M+/
↵
↵↵
↵
]
key to be pressed again.
This can continue for up to 99 entries or until the capacity of the
“Weight”
display is exceeded.
•
To observe the total stored times and count value, press the
[Total]
key.
•
Press the
[M+/
↵
↵↵
↵
]
key
will return to the normal weighing .
7.7 BACKLIGHT FOR LCD
•
The backlight of the LCD can be set to be light or dark.
•
When in normal weighing mode press the
[Sample /Blight]
key to change the
state of the backlight.
8.0 FUNCTION
SETTING
8.1
ENTERING
THE
FUNCTION
SETTING
MODE
•
To enter the parameter menu, hold
[Zero]
and press the
[Tare]
key when in
normal weighing mode.
•
The display will show the revision number in the
“Weight”
display ,The
“Unit
Weight”
display will show
"- - - - "
requesting the password number to be
entered.
•
The default password is
"0000"
but other numbers can be set using the
parameter menus. Press the
[0]
key four times. The display will jump to the
first parameter.
"FILt ?"
with the Unit weight window showing the current
filter setting.
