Menu Operations
38
5.6
Power setting
When you select this option, you will see a
screen like beside:
LNB Power: If your receiver is connected to
the LNB directly then you need to set the
LNB Power to “On”. If your receiver is
connected to a multi switch (SMATV signal
distribution system) then it may be that you
don’t need to provide the power to the LNB.
But since this is depending on the kind of
installed distribution system we recommend you to contact your installer or to
refer to the user manual of this system to get the correct information.
You also just can change this setting and check if you still can receive the
channels. If the LNB Power is off and you still can see all channels then we
recommend this setting.
