Menu Operations
44
6.6
SatcoDX Auto Programming
This function is using the tables of the SatcoDX websites to update your channel
and satellite lists. You need a special application which is available on
the CD-ROM of the Tele-Satellite magazine. Install this software on your PC first.
1.
Start the SatcoDX application on your PC.
2.
Select “SatcoDX Auto Programming” item from the “Tools” menu and press
[OK]. The screen will show the message “OK to Proceed”.
3.
Press [OK] again and you will see the message “Ready to Download”.
4.
In the PC application set the Baud Rate to 115200 and start the download
procedure.
!
Caution:
The new download channels will delete the original channels list.
Please be careful before using it.
6.7
Smart Card
This function is used to receive scrambled digital satellite channels.
1.
Preparing
To be able to receive scrambled digital
satellite channels you need a Smart card
from the Service Provider of your choice.
Only free to air channels are available
without the Smart card.
Insert the Smart card to the CA slot. This
will give you access to scrambled channels.
2.
Check Manager
Select “Smart Card” menu, then receiver detects and shows the CA system
name which you are using. The Smart card may also provide access to
special menus not described in this manual. If so, please follow the
instructions from the Service Provider.
