8.9. DISASSEMBLY OF THE MB-10 BLENDER
Before starting to perform the disassembly works of the blender:
- disconnect the motor of the mixer
- close the suction and discharge valve of the mixer
- place some trays for collection of liquids
Use gloves and safety goggles to empty the blender.
8.9.1. Disassembly of the hopper
1.
Loosen and remove the blind nuts (54B).
2.
Loosen the nuts (54A) and remove the threaded
rods (55).
3.
Remove the clamp (92) that joins the hopper (101)
to the butterfly valve (96).
4.
Remove the hopper (101).
8.9.2. Disassembly of the venturi tube
1.
Remove the clamp (92) that joins the mixer to the venturi tube (102).
2.
Remove the clamp (92) that joins the venturi tube (102) to the butterfly valve (96).
3.
Remove the venturi tube (102).
92
92A
54A
54A
55
101
54B
02.020.32.0013
92
92A
102
92
92A
96
02.020.32.0012
Maintenance
INOXPA S.A.U.
02.020.30.02EN · (0) 2022/02
18
