INOXPA HLR, Installation, Service And Maintenance Instructions

Page: 38 / 48

(A) 2021/11 8.Technical Specifications 37
8.6.2. Spare parts list
Pos. Description Quant. Material
01 Rotor case 1 AISI 316L
HLR 1-25 ( short )
HLR 1-40 ( large )
02 Rotor 2 AISI 316L
HLR 1-25 ( short )
HLR 1-40 ( large )
03 Front cover 1 AISI 316L
05 Drive shaft 1 AISI 329
05A Driven shaft 1 AISI 329
06 Gear case 1 GG-22
08 Mechanical seal 2 SiC/C/EPDM
12 Bearing cover 1 GG-22
12A Bearing stop flange 2 GG-22
17 Drive shaft bushing 1 ST-52
17A Driven shaft bushing 1 ST-52
17B Dragging bushing 1 ST-52
18A Bearing cover gasket 1 Klingerit
19 Driver shaft gear 1 F-154
19A Driven shaft gear 1 F-154
25 Lobe screw 2 AISI 316L
HLR 1-25 ( short )
HLR 1-40 ( large )
32 Shim - ( * ) SS
35A Seal washer 8 AISI 316L
45 Wing nut 4 AISI 304
47A Protector 1 PET-Plus
50 Screw 2 A2
51 Allen screw 8 8.8
51A Allen screw 8 8.8
51D Allen screw 4 8.8
51F Allen screw 8 A2
53 Flat washer 4 A2
54A Hexagonal nut 4 A2
55A Stud 4 A2
55B Stud 4 A2
56 Pin 4 F-522
56B Pin 4 A2
61 Key 1 F-114
61A Key 1 AISI 304
62 Safety nut 2 Steel
63 Safety washer 2 Steel
65A Conical tightening ring 1 Steel
66 Circlip 1 Steel
70 Ball bearings 2 Steel
70A Needle bearings 2 Steel
80 O-ring 2 70 EPDM
80A Front cover gasket 1 70 EPDM
80B O-ring 2 70 EPDM
82 Splash ring 2 EPDM
84 Blanking plug 1 72 NBR
85 Oil plug 1 Plastic
86 Peephole 1 Plastic
87 Bleeder 1 Plastic
88 Lip seal 1 72 NBR
89 Lip seal 2 72 NBR
* Quantity of shims may vary from one pump to another