ED. 2010/11
3.Receiving and Installation
7
The buyer or user will be responsible for the assembly, installation, starting and operation of the
valve.
3.4.
LOCATION.
Place the valve in such a way as to facilitate inspections and checks. Leave sufficient space around the valve for appropriate
inspection, separation and maintenance (See Section 3.7.1).
3.5.
FLOW DIRECTION.
The overflow valve is designed to be installed according to the indicated direction of flow.
3.6.
OVERFLOW VALVE POSITION.
The overflow valve is designed to be installed in any position, although fitting it upside down is not recommended.
3.7.
ASSEMBLY.
Once the location of the valve is established, the pipe can be connected by welding the body or by jeans of accessoriees
(unions). The overflow valve is designed to be installed in any position, although fitting it ápside down is not recommended.
Excessive stress should be avoided during the assembly of
the valves and special attention should be given to the
following:
Vibration which may be produced in the installation.
Expansion of the pipes during circulation of hot liquids.
The weight that the pipes can withstand.
Excessive intensity of welding.
Recommended
Not
recommended
