4
1.Safety
ED. 2010/11
The valve contains parts operating in linear movement. Do not place your hands or fingers in the
valve-closing area. This may cause serious injury.
1.4.3.
During maintenance
of Chapter 8 should always be observed.
NEVER disassemble the valve until the pipes have been emptied. Bear in mind that the liquid in the
pipe may be dangerous or extremely hot. Consult the regulations in effect in each country for these
cases.
Do not leave parts loose on the floor.
All electrical work should be carried out by authorised personnel.
1.4.4.
In compliance with the instructions.
Any non-fulfilment of the instructions may result in a risk for the operators, the environment and the machine, and may result
in the loss of your right to claim damages
This non-fulfilment may result in the following risks:
Failure of important functions of the machines/plant.
Failure of specific maintenance and repair procedures.
Possibility of electric, mechanical and chemical risks.
Will place the environment in danger due to the release of substances.
1.5.
GUARANTEE.
Any guarantee will be cancelled immediately and as a matter of law and, in addition, we will require compensation for any
claims of civil liability presented by third parties, if:
The installation and maintenance work has not been carried out according to the instructions of this manual.
The repairs are not carried out by our personnel or have been carried out without our written authorisation.
The parts used are not INOXPA original parts.
Modifications have been carried out on our materials without written authorisation.
The material has been badly used, incorrectly used, or used with negligence or has not been used according to the
indications and intended use specified in this manual.
The general conditions of delivery already in your possession are also applicable.
Please do not hesitate to contact us in case of doubts or more complete explanations are required on specific data
(adjustments, assembly, disassembly, etc.).
