SYSTEMS FOR VOICE AND DATA COMMUNICATION
GSM
GSM
GSM
GSM //// ANALOG DOOR
ANALOG DOOR
ANALOG DOOR
ANALOG DOOR PHONE STATION
PHONE STATION
PHONE STATION
PHONE STATION
(using CLIP service) or receiving SMS, activates TCP connection to
specified server over mobile network
- by SMS sent to GSM door entry phone station
- over radio / Ethernet converter using TCP / IP protocol in application client-
server
- manually:
- setting of programming mode, programming of RFID cards using device
pushbuttons
! Caution
If USB cable is connected to PC and than the power is on, device is in change
firmware state (bootloader is running) and wait some ten seconds. In this state
firmware can be changed by using another software in PC.
If the remote upgrade firmware via GSM network is unsuccessful only locally way by
USB after turn off is able.
Configuration SW uses graphic mode. Configurations data can be saved to PC.
Configuration SW contains the file with default production configuration. Structure of
configuration tables is dynamic, that means their size and location in EEPROM
memory is variable. Total capacity of configuration data depends on type of
EEPROM memory used. Basic type capacity is 8kB and can be increased without
need to change PCB. For easier programmed of some parameters (codes,
contactless cards,...), e.g. by SMS, configuration SW enables to generate the size of
individual tables in accordance with customer requirements without obligation to
change complete memory content (that is time-consuming process and can not be
executed by configuration by SMS, that means the table size is not extended
automatically after its overload).
