Inoksan INO-SDF070/S, Instruction Manual

Page: 18 / 28

ERROR POSSIBLE CASUSES POSSIBLE REMEDIES
Equipment is not
powered .
It is not plugged . Plug in/ call the authorized service.
Power inlet cable is out of order/ cut Check / call the authorized service..
Main switch of the equipment is
turned off.
Turn on the mains switch / call the
authorized service.
Control board is not energized. Check / call the authorized service..
On/off button is turned off. Turn on the on/off button .
Equipment does not
cool enough .
Cooling temperature is not selected
correctly. Check the cooling temperature and, if
necessary, increase the temperature.
Equipment is positioned near a heat
source (cooker, oven etc.) or being
exposed to directly . As defined in “INSTALLATION” chapter,
keep away the equipment from the source
of heat and direct sunlight. .
Ventilation holes are obstructed. Open the ventilation holes.
Condenser is dirty. Check / clean.
In the cooling cycle, there is a
discjucture/cut at any point or the
cooling gas finished. Call the authorized service..
Evaporator has excess frost deposit. Perform a defrost cycle.
Ambient temperature is too high. Check the ambient temperature and, if
possible, reduce.
Equipment cools too
much . Cooling temperature is not selected
correctly. Check the cooling temperature and, if
necessary, decrease the temperature.
Equipment does not
illuminate .
It is not plugged. Plug in. / call the authorized service.
Power cable is out of order/ cut . Check / call the authorized service..
Mains switch is turned off. Turn on the mains switch.
Control board is not energized. Check / call the authorized service..
Illumination button is turned off. . Turn on the illumination button .
Flourescant lamp is out of order. Check / call the authorized service..
Refrigerator motor does
not operate. Socket is not energized. Check.
Cooling control device is turned
off. Check / turn on.
Condenser fan does not work. Call the authorized service..
Other Call the authorized service.
Refrigerator motor
operates noisy.
Condenser is dirty. Check / clean.
Fan motor is out of order . Call the authorized service..
Other Call the authorized service.
Equipment does not
defrost .
Defrost adjustment is not done on
the cooling control device. Check. Adjust defrost.
Cooling control device is out of
order. Call the authorized service..
Other Call the authorized service..
STORAGE TEMPERATURES AND PERIODS OF SOME FOODS
FOOD
TEMPERATURE
(
0
C )
PERIOD
Meat 0 ÷ 2 3-5 days
Minced meat 0 ÷ 2 1-2 days
Fish -1 ÷ 0 1-2 days
Egg 4 ÷ 7 1 week
Pasteurized milk 3 ÷ 4 1 day
Soft fruit 4 ÷ 7 2 days
Hard fruit 4 ÷ 7 2 week
Green vegetables 4 ÷ 7 5 days
Other vegetables 4 ÷ 7 2 week