Inoksan INO-SDF070/S, Instruction Manual

Page: 16 / 28

GB
STORAGE TYPE REFRIGERATOR
TECNICAL DATA
MODELES
MODELS
TEMPERATURE
INTERIEURE
TEMPERATURE
°C
CAPACITE
CAPACITY
Lt
PUISSANCE
POWER
W
DIMENSIONS
DIMENSIONS
( H*D*W cm )
TAILLE DU
PAQUET
PACKING DIM.
Cm
POIDS
WEIGHT
kg
INO-SDN070/S
-2 / +8 600 0,85 2100x700x770 2140x750x820 140
INO-SDN140/S
-2 / +8 1200 0,95 2100x1400x770 2140x1450x820 175
INO-SDN070/S -10 / -20 600 1,17 2100x700x770 2140x750x820 140
INO-SDN140/S -10 / -20 1200 1,65 2100x1400x770 2140x1450x820 175

İnternal volume appropriate for GN2/1

Digital thermometer & thermostat -
automatic defrost

Ventilated cooling system

İnterior stainless steel

Appear exterior surface of stainless steel

45 Kg/m
3
R 134 A Ecology Friendly CFC
Free Polyurethane Insulation

3 Units of plastic coated steel shelves ( Dim :
53x65cm )

Adjustable stainless steel shelf holders

Removable and easy cleaning magnetic
gaskets

Special door and hinges design

Special and ergonomic design

Adjustable feet

Cooling gas : R 404 A / R 134 A

Ambient temperature : +35°C (-2/+8) SDN
140 - 070

Ambient temperature : +43°C dir. (-10/-20
için) SDF 140-070

Working voltage : 220-230 V 50Hz.
2. INSTALLATION

Mount your appliance on a smooth surface,
ensuring the equilibrium with the help of
adjustable feet.

Connect the water feed and waste water
discharge line (if any).

Place your appliance at a sufficient distance
away from heat sources such as stove, furnace,
radiators and sunlight.
3. ELECTRICAL CONNECTIONS

The appliance should be supplied with the 1N
220V AC 50Hz mains voltage.

The selected cable’s cross-section should allow
the flow of maximum current.

Voltage tolerance should not exceed
±
10%.

The appliance should strictly be earthed. In
case of operating the appliance without proper
earthing, our company will in no way
whatsoever be held liable.

In case of immediate electrical cut-offs or plug-
ins/plug-outs, your appliance’s system may be
damaged due to the unbalanced gas pressure in
the refrigerating system. Sufficient care should
be observed against such cases and it should be
noted that failures to arise out of such cases
shall be out of the warranty coverage.
4. OPERATION

Wait for 1 hour before starting your appliance.
In this way, the oil that has mixed into the
system during transport or handling will return
to the compressor.

Connect the appliance’s plug into earthed
socket.

Start your appliance with the switch on-off
button.

Start the fan if your appliance is forcedly
cooling mechanism.

Do not open the lids until the humidity amount
is dropped down to a stable level.

Set the desired temperature digital thermometre.

Your appliance has been designed to operate at
an ambient temperature of +35
o
C, relative
humidity of 60% and at a temperature range of -
2/+8
0
C. Any other ambient condition may give
rise to efficiency losses.