Copyright Innovative Technology Ltd 2012
GA401-5
SMART HOPPER OPERATIONS MANUAL
9
4
INSTALLATION
4.1
HOPPER INSTALLATION
1. Secure the mounting plate using the 6 fixing holes shown in Appendix B –
Dimension Drawing.
2. Connect the cable from the host machine to the connector on the rear of the
mounting plate. See Chapter 5.2.2 - Interface Connector for connection details.
3. Slide the hopper onto the base plate; ensuring the hopper is fully pushed into
position.
4. Apply power to the machine.
NOTES ON SAFETY
Do not put a hand into the hopper while power is applied.
It is possible for a static charge to be transferred onto the coins during
normal operation. The coins should be discharged to earth before they are
accessible to the user.
The base plate should always be connected to earth during operation to
avoid a build-up of static electricity inside the unit.
WARNING
Always ensure the bottom cash box exit on the underside of the SMART
Hopper is clear to allow coins to exit. Failure to do so can result in
permanent damage to the internal mechanisms
