Copyright Innovative Technology Ltd 2012
GA401-5
SMART HOPPER OPERATIONS MANUAL
4
1
INTRODUCTION
This manual describes the operation of the SMART Hopper programmed with version
SH00026 firmware or later. As a result of Innovative Technology Ltd continuous
improvement policies, some functions mentioned in this manual may be changed. New
functions may also be added.
This document is intended for those who will
Install the SMART Hopper
Maintain the SMART Hopper
Although information is included in this document that will allow a degree of fault diagnosis
and repair, it is recommended that for all but simple repairs, the unit must be returned to an
approved service centre for repair.
CAUTIONS
Never exceed the recommended environmental and electrical limits.
Do not attempt to lubricate the mechanisms as this may affect the coin transport.
Always ensure power is removed from the hopper before carrying out any work.
WARNINGS
Only suitably trained personnel should carry out any work on this equipment in
accordance with all current local, national and international health and safety
regulations.
Always ensure the bottom cash box exit is clear to allow coins to exit the SMART
Hopper. Failure to do so can result in permanent damage to the internal
mechanisms
We recommend that you study this manual as there are many new features permitting new
uses and more secure applications. If you do not understand any part of this manual please
contact your local office for assistance
.
In this way we may continue to improve our
product.
Innovative Technology Ltd has a policy of continual product improvement. As a result the
products supplied may vary from the specification described here.
