7
Step 5:
Locate the ramp cover labeled 4.
Attach the ramp cover with three AA6072 nuts (location shown with red arrows). Make sure the
cover is flush to the ramp and pay attention to the three points shown with yellow arrows below.
DO NOT TIGHTEN ANY HARDWARE YET.
Attach the ramp assembly to the elevator with AA6072 nut
shown with the blue arrow.
DO NOT TIGHTEN.
4
Step 6:
Locate the ramp cover labeled 5.
Attach the ramp cover with three AA6072 nuts (location shown with red arrows).
Make sure the cover is flush to the ramp and pay attention to the three points
shown with yellow arrows below.
DO NOT TIGHTEN ANY HARDWARE YET.
Attach the ramp assembly to the elevator with AA6072 nut
shown with the blue arrow.
CAUTION: DO NOT PINCH BELT WITH SIDE COVER
.
5
AA6072 NUT
AA6072 NUT 3 PLACES
AA6072 NUT 3 PLACES
AA6072 NUT
Wire harness
hole this side.
Summary of Contents for Super Kixx Pro
Page 4: ...4 Parts Included Inside Base...
Page 31: ...31 Proper Belt Routing Diagram Both Belts...
Page 32: ...32...
Page 33: ...33...
