20
All parts in the SUPER KIXX PRO
™
Hockey Game have been manufactured to the highest stand-
ards possible.
WARNING: THIS GAME DOES NOT REQUIRE ANY LUBRICATION. USE OF ANY OILS OR
GREASE MAY VOID YOUR WARRANTY.
PARTS KIT
Included in the spare parts kit, is a wire cable with loop & hooks. This is used to hold the dome open
when tilted back to service the game.
In the event the goalies are removed, extra cotter pins are provided if the original cotter pins are
damaged or lost.
COIN MECHANISMS
Mechanisms should be cleaned and adjusted when necessary. Follow the manufacturer
’
s instruc-
tions on adjustment and maintenance.
PLAYER WASHERS
These washers, located over each gearbox, serve to keep the players shafts in place in their gear-
boxes.
Extreme care should be exercised when pulling out or pushing in players because a washer that
falls into a track can be bothersome to remove. To help eliminate this problem, push all the rods all
the way in, and pull the player straight out. When pushing a player back in, be sure the gearbox is
lined up with the shafts. If not, slowly rotate the rod while pushing down on the player.
NOTE: WASHERS SHOULD BE REPLACED WHEN WORN TO THE POINT THAT THEY CAN NO
LONGER HOLD THE PLAYERS IN. AFTER PLAYERS ARE INSERTED, PULL UP GENTLY TO
TEST THE STRENGTH OF THE WASHERS.
MAINTENANCE
PLAYER WASHER
Summary of Contents for Super Kixx Pro
Page 4: ...4 Parts Included Inside Base...
Page 31: ...31 Proper Belt Routing Diagram Both Belts...
Page 32: ...32...
Page 33: ...33...
