14
Step 4:
The main circuit board is located on the single
access door. Open the access door to connect
the two harnesses to the main board.
Step 5:
Plug the game
’
s AC cord into a properly GROUNDED AC outlet. Open the front door to
access the power switch. On the home version, press the
“
POWER
”
button located at the side of
the base.
Turn on the game and test to make sure the ball elevator is going up and down when a goal is
scored. If the ball does not surface to the playfield after a goal is scored then do the following:
1
–
Check if the ball is installed into game. Refer to beginning of manual
“
Step 1: Install the ball
”
2
–
Check to make sure the elevator is traveling to the top of the playfield. Start a game, after the
commentator is finished talking the ball elevator will rise to the playfield with the ball. If the
elevator does not rise, please hold the yellow button (located by the handles) for 5 seconds.
3
–
Call our tech support at (716) 759
-
0360 Monday through Friday 8:30 am to 6:00 pm Eastern
Standard Time or contact us through our Website at www.icegame.com.
Summary of Contents for Super Kixx Pro
Page 4: ...4 Parts Included Inside Base...
Page 31: ...31 Proper Belt Routing Diagram Both Belts...
Page 32: ...32...
Page 33: ...33...