Innovative Circuit Technology Ltd.
21
Activate Form-C Contact
: Checking this box will cause the Alarm relay to
trigger for an under-voltage condition.
Send E-mail
: Checking this box will cause the unit to send a System Under-
Voltage alarm e-mail to the assigned address entered on the
E-mail Setup
page.
System Over Voltage Alarm:
Over-Voltage Threshold:
If the system voltage rises above the value in this
field, the system over-voltage alarm will trigger.
Activate Form-C Contact
: Checking this box will cause the Alarm relay to
trigger for an over voltage condition.
Send E-mail
: Checking this box will cause the unit to send a System Over-
Voltage alarm e-mail to the assigned address entered on the
E-mail Setup
page.
System Over-Current Alarm:
Over-Current Threshold
: Enter the maximum total current level for the
system. Current exceeding this level will trigger the Over-Current alarm.
Activate Form-C Contact
: Checking this box will cause the Alarm relay to
trigger for an over-current condition.
Send E-mail
: Checking this box will cause the unit to send a System Over-
Current alarm e-mail to the assigned address entered on the
E-mail Setup
page.
Alarm Input #1 to #5:
Configure the five Site Monitor inputs to enable the panel
to monitor external contact closure events on door and window sensors, smoke
alarms, etc.
Alarm Name
: Enter a descriptive name for the external contact being
monitored. This will be used in e-mail and front panel alarm messages.
Contact Type
: Select if the external alarm contact input is to be used, and
what contact type is connected to each input. Choose “Normally Open”
contact, “Normally Closed” contact, or “Not Used”.
Activate Alarm Form-C Contact
: Check this box to have the Alarm relay
output indicate a fault for an alarm condition on that input.
Send E-mail
: Check this box to have an email notification sent when one of
the enabled alarm inputs is triggered, stating which input was affected. Note
