Innovatech TERMINATOR-2000e, Operation And Maintenance Manual

Page: 37 / 58

INNOVATECH PRODUCTS AND EQUIPMENT CO., INC.
37
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
Recover free product. Add sand, earth or other suitable absorbent to spill area. Minimize breathing
vapors. Minimized skin contact. Open all windows and doors. Keep product out of sewers and
watercourses by diking or impounding. Advise authorities if product has entered or may enter sewers,
watercourses, or extensive land areas.
Assure conformity with applicable governmental regulations.
THE FOLLOWING INFORMATION MAY BE USEFUL IN COMPLYING WITH VARIOUS STATE AND
FEDERAL LAWS AND REGULATIONS UNDER VARIOUS ENVIRONMENTAL STATUTES:
THRESHOLD PLANNING QUANTITY (TPQ), EPA REGULATION 40 CFR 355 (SARA Sections 301-
304); No TPQ for product or any constituent greater that 1% (carcinogen).
TOXIC CHEMICAL RELEASE REPORTING, EPA REGULATION 40 CFR 372 (SARA Section 313); No
toxic chemical is present greater than 1% or 0.1% (carcinogen).
HAZARDOUS CHEMICAL REPORTING, EPA REGULATION 40 CFR 370 (SARA Section 311-312);
EPA Hazard Classification Code: Not Applicable
TOXIC SUBSTANCES CONTROL ACT
This product contains the following TSCA 12b reportable chemical substance(s): 2-Ethylhenxanol
CAS # 104-76-4.
I. PROTECTION AND PRECAUTIONS
VENTILATION
Use local exhaust to capture vapor, mists or fumes, if necessary. Provide ventilation sufficient to
prevent exceeding recommended exposure limit or buildup of explosive concentration of vapor in air. No
smoking, or use of flame or other ignition sources.
RESPIRATORY PROTECTION
Use supplied-air respiratory protection in confined or enclosed spaces, if needed
PROTECTIVE GLOVES
Use chemical-resistant gloves, if needed, to avoid prolonged or repeated skin contact.
EYE PROTECTION
Use splash goggles or face shield when eye contact may occur.
OTHER PROTECTIVE EQUIPMENT
Use chemical-resistant apron or other impervious clothing, if needed, to avoid contaminating regular
clothing, which could result in prolonged or repeated skin contact.
WORK PRACTICES / ENGINEERING CONTROLS
To prevent fire or explosion risk from static accumulation and discharge, effectively bond and/or
ground product transfer system in accordance with the Nation Fire Protection Association
PUBLICATIONS.
Keep containers closed when not in use. Do not store near heat, sparks, flame or strong oxidants.
In order to prevent fire or explosion hazards, use appropriate equipment/
Information on electrical equipment appropriated for use with this product may be found in the latest
edition of the National Electrical Code (NFPA-701). This document is available from the National Fire
Protection Association.