Innovatech TERMINATOR-2000e, Operation And Maintenance Manual

Page: 22 / 58

INNOVATECH PRODUCTS AND EQUIPMENT CO., INC. 22
MAINTENANCE PROCEDURES
1.) Grease Caster Wheel at three fittings every 30 hours.
2.) Check Hydraulic Oil Once a month. Change every 18 months with NUTO H 46 or ISO 46 or if
fluid is overheated 200
°
F or higher.
3.) Change hydraulic filter every 60 hours.
4.) Check water level once a week in batteries.
5.) Clean Caster Wheel and Back Tires with wire wheel when necessary.
6.) Lube jaw hinge once a month.
7.) Look for leaks, find and tighten fittings – do not over tighten fittings.
8.) Check all hoses and clamps once a week.
9.) Inspect rear tires and lug bolts. Tighten lug bolts as needed to 70-foot pounds torque.
10.) Check wheel hub every 60 hours of operation. Wheel hub pack nut should be torqued from 310
to 350 foot pounds (ft. lbs).