Document # 31-0008
LM2_Manual_1.4.doc
7
connector.
Last, “H” indicates that the unit is the MTS head unit. If the unit is not head this indicator
will appear as a “-“
1.3 Configuration Menu Screen
To enter the Configuration Menu Screen press and hold the
Mode
button.
Navigating the Menu:
“
Enter
” Accepts
“
Cancel
” Returns one menu level
“
Mode
” Returns to Main Screen
Arrows
adjust selection or value
“
Record
” has no effect
When “Mode” is first pressed, the following choices appear:
•
Display AFR or Lambda.
The factory default setting is AFR.
•
Calibrate Sensors
- Free Air Calibrate ALL O2 sensors connected will be
calibrated
•
RPM
– Enable/Disable RPM and Configure RPM.
•
Analog Inputs
- Enable/Disable Analog Inputs and Configure Inputs.
•
OBD-II
- Configure Number of Channels (0-16), Channel Use, Get/Clear DTC
codes Display in Metric/Imperial Units, and Start Trace File.
•
Playback Log
•
Reverse/Normal Display
•
Set Date/Time
- Set the current date/time
Important Note: Entering the Configuration Menus will stop recording and
suspend MTS packet output