5
UEPM Development Board
1. PRECAUTIONS
1.
CAUTION!
Keep the UEPM Development Board away from water or wet surfaces.
2.
CAUTION!
Lay the UEPM Development Board on a flat surface. Any fall or shock
could permanently damage the unit and thus void warranty.
3.
CAUTION!
Keep the UEPM Development Board away from direct sunlight. Even in
cold environments, the sunlight rays can be powerful enough to damage the LCD
display or others components, or cause the overheating of some parts of the circuits.
4.
CAUTION!
Use only the power supply provided with the UEPM Development Board
or an appropriate 5V and >1000mA power supply. An inappropriate power supply could
permanently damage the UEPM Development Board.
5.
DANGER!
Follow the temperature usage recommended. The UEPM Development
Board is equipped with a lithium battery, used for its high capacity. However, lithium
battery type can be dangerous if not properly used. The battery may explode if not
charged properly (wrong power supply) or over heated (hot weather). As well, the
battery may lose its capacity if used in cold conditions.
6.
CAUTION!
USB connections 5 and 10 shown in
bulun
amadı.
are not standard USB compliant. You should only connect sensors
delivered with the UEPM Development Board to these connections. Otherwise you
could damage the device and this would void the warranty.
7.
CAUTION!
Sensors should be used only with air and dry environment. Using sensor
for underwater pressure or using sensors with different gases could cause permanent
damage on sensors.
8.
DANGER!
Do not use the UEPM Development Board hardware and software before
reading user manual. Otherwise, you could cause accidents resulting in death or
injuries.
