7
3. BOARD OVERVIEW
Figure 1
– Board Overview
1
MSP-TS430PN80USB. Target Board for Texas Instruments 80-PN package
MSP430 microcontrollers. Equipped with JTAG for on-board programming and
debugging, and USB. Specific datasheet available on the CD provided with the
UEPM Development Board.
2
INT018ATFT LCD display. 1.8” TFT, 160x128 RGB integrated driver. Specific
datasheet available on the CD provided with the UEPM Development Board.
3
Extension of the MSP430’s 80 pins. 0.1” pitch connectors.
4
CGR18650CG. Lithium-Ion Rechargeable battery.
5
Mini-USB connector. Power supply to recharge the battery. NOT USB
COMPLIANT. Connect only a power supply with 5V and at least 1A capacity.
6
Reference pin (GND) and pins to control current through the battery.
7
Switches controlling power supply to the MSP430 and peripheral components.
8
Jumpers to select the devices to be connected to the two UART ports of the
MSP430. For each port (UART1 and UART2) can be connected an XBEE port, a
pressure sensor or (only on UART1) the Underwater Wireless Module.
9
XBEE1 and XBEE2 ports. 2 x Ports compatible with XBee footprint modules.
