background image

page 40

innovaphone IP DECT

4.1.4.1 Configuration/LDAP/Server

Here, access data can be configured that allows external LDAP clients read or 
read and write access to the LDAP database.
VoIP telephones require read access to the LDAP database. Replication connec-
tions require write access.

4.1.4.2 Configuration/LDAP/Server-Status

The displayed server status data is automatically updated at intervals.

4.1.4.3 Configuration/LDAP/Replicator

LDAP replication can be configured here. The task of LDAP replication is to copy 
and keep up to date the entire content or parts of the user database of a remote 
innovaphone PBX.

Username

The LDAP user name.

Password

The relevant LDAP user password.

Write 
Access

Write authorisation is granted if the check box is checked.

connections

Total number of all connections to the LDAP server.

write con-
nections

Number of connections with write authorisation.

rx-search

Number of received search inquiries.

rx-modify

Number of received change requests.

rx-add

Number of received add requests.

rx-del

Number of received delete requests.

rx-abandon

Number of received termination requests.

tx-notify

Number of sent notifications.

tx-error

Number of sent error notifications.

tx-error-49

Number of sent error notifications due to incorrect access data.

tx-error-50

Number of sent error notifications due to insufficient rights.

Summary of Contents for IP1200



















































































































Reviews: