page 34
innovaphone IP DECT
transmitted to the specified VLAN only.
4.1.3.6 Configuration/ETH0-1/DHCP Server
If the DHCP server was enabled (see chapter entitled “
Configuration/ETH0-1/
DHCP
”), it can be configured here.
All settings marked with a “
*
” are innovaphone-specific settings that may only
be found with innovaphone devices.
Address Ranges:
Offer Parameters:
ID
The ID of the VLAN. The value 0 is applied if the
ID
entry field
is empty. The VLAN ID with the value 0 switches the QoS (
Q
ua-
lity
o
f
S
ervice) off according to 802.1q.
Priority
If the switch at the port to the innovaphone gateway happens to
be configured to a different ID, the same value must be entered
here to allow the Ethernet packets to be prioritised. A priority va-
lue between 0 and 7 is entered here (configuration on the Ether-
net switch).
Lease
Time
[min]
The validity period of the DHCP lease in minutes.
Check
Interval
[min]
The interval (in minutes), at which a check is made whether the
DHCP lease is still valid.
First
Address
The IP address that represents the start of the address range
(for example,
192.168.1.100
).
Last
Address
The IP address that represents the end of the address range
(for example,
192.168.1.110
).
Network
Mask
The network mask in respect of the IP address (for example,
192.168.1.100
corresponds to the network mask
255.255.255.0
).
