Innova Srl
Page 10
N420741A_manuale-HRC+2022 - rev.01 _EN
.docx
2.1.2
UNIT POSITIONING
Unit placement
The unit can be installed close to the wall with the pipes
directly outwards or away from the wall by making a
minimum of ducts to arrive with the pipes outwards;
-For ducted installation, leave the dn250mm male fittings
on the unit which will be used to connect the pipes to the
outside;
The ducted installation provides for the possibility of
creating a maximum of 8 meters of ducting;
For non-ducted installation the unit does not provide
ducts but installation directly adjacent to the wall and
direct outwards holes;
In this case it is possible to leave the fittings if the
centering of the holes towards the outside is very precise
or to remove them to bring the unit in adherence with the
wall;
Unit placement
