Innova Srl
Page 5
N420741A_manuale-HRC+2022 - rev.01 _EN
.docx
1.1.3
SYMBOLOGY
The symbols shown in the following booklet allow you to quickly provide information necessary for the correct use of the unit.
Safety symbols
ATTENTION
Only authorized personnel
Warns that the operations indicated are important for the safe operation of the machines
DANGER
Risk of electric shock
Warns you that failure to comply with the prescriptions creates a risk of electric shock.
DANGER
Warns that failure to comply with the prescriptions entails a risk of harm to exposed
persons.
WARNING
Warns that failure to comply with the prescriptions entails a risk of damage to the unit or
to the system.
DANGER
It warns that there is the presence of moving parts and involves a risk of damage to
exposed people
1.1.4
WARNINGS
The unit must be installed by qualified and authorized personnel according to the regulations in force in the various
countries. If the installation is not carried out it could become a dangerous situation
Avoid installing the unit in very humid rooms or with large heat sources.
On the electrical side, to prevent any risk of electrocution, it is essential to disconnect the main switch before carrying out
electrical connections and any maintenance operations.
In the event of water leaks inside the unit, turn the main system switch to "Off", close the water taps and contact the
technical service
It is recommended to use a dedicated power supply circuit; Never use a common power supply with other appliances.
It is recommended to install an earth leakage breaker; Failure to install this device may cause electric shock.
