Innova Srl
Page 4
N420220A_ManualeHRC_Rev07.EN
1
GENERALITY
1.1.1
INTRODUCTION
This manual has been conceived with the aim of making the installation and management of your system as simple as possible.
By reading and applying the suggestions in this manual, you will be able to get the best performance from the product you have purchased.
We would like to thank you for the choice you made with the purchase of our product.
Read this booklet carefully before carrying out any operation on the unit.
You must not install the unit or carry out any work on it unless you have carefully read and understood this manual in all its parts. In particular, all
the precautions listed in the manual must be taken.
The documentation supplied with the unit must be delivered to the plant manager so that he can keep it carefully (at least 10 years) for any future
assistance, maintenance and repairs.
The installation of the unit must take into account both the purely technical requirements for proper functioning, and any local legislation in force
and specific prescriptions.
Make sure that upon delivery of the unit, there are no obvious signs of damage caused by transportation. In this case indicate it on the delivery
note.
This manual reflects the state of the art at the time the machine was marketed and cannot be considered inadequate as it is subsequently updated
on the basis of new experiences. The Manufacturer reserves the right to update production and manuals, without the obligation to update the
previous ones, except in exceptional cases.
Contact the Manufacturer's Sales Department to receive further information or updates to the technical documentation and for any suggestion for
improvement of this manual. All reports received will be rigorously examined.
1.1.2
FUNDAMENTAL SAFETY RULES
We remind you that the use of products that use electricity and water involves the observance of some fundamental safety rules:
It is forbidden to use the appliance for disabled and unassisted people
It is forbidden to touch the appliance with bare feet and with wet or humid peers of the body
Any cleaning operation is prohibited before disconnecting the appliance from the power supply by turning the main switch of the system
to off
It is forbidden to modify the safety or adjustment devices without the authorization and indications of the manufacturer of the appliance
It is forbidden to pull, disconnect or twist the electric cables coming out of the appliance, even if it is disconnected from the mains
electricity supply.
It is forbidden to introduce objects and substances through the air intake and delivery grilles.
It is forbidden to open the access doors to the internal parts of the appliance without first setting the system main switch to off.
It is forbidden to disperse and leave the packaging material within reach of children as it can be a potential source of danger.
Respect the safety distances between the machine and other equipment or structures to ensure sufficient access space to the unit for
maintenance and assistance operations as indicated in this booklet.
The unit must be powered with electrical cables with a section suitable for the power of the unit. The voltage and frequency values must
correspond to those indicated for the respective machines; all the machines must be earthed as per the regulations in force in the various
countries.