Innova Srl
Page 16
N420220A_ManualeHRC_Rev07.EN
CONNECTIONS BY THE CUSTOMER
L - N
230/1/50 mains power supply
4
SYSTEM CONFIGURATION PROCEDURE VERSION -E-
4.1.1
GENERALITY
-The configuration must be carried out in the first commissioning by the installer or by qualified personnel.
An incorrect configuration could compromise the proper functioning of the system.
Carefully follow the configuration procedure described below.
4.1.2
MASTER UNIT
1 Power up all units in the system.
The units will be powered and in standby mode.
The Master unit is already configured in the factory with
its own remote control;
Do not swap the remote controls of two master units, but
use its own remote control for each unit;
Master unit configuration