Innova Srl
Page 24
N420220A_ManualeHRC_Rev07.EN
5.1.11
PARAMETER SETTING (HUMIDITY THRESHOLD AND ACTIVATION OF BRIGHTNESS FUNCTION)
-
VERSION E -
1
Press and hold the AUTO button until the central LED
flashes quickly. The central signaling LED will flash quickly
as indicated in the figure to the side, signaling the entry
into the parameter configuration.
Now it will be possible to set:
- the humidity level for the dehumidification function
- activation or deactivation of the light function
Access to parameter configuration procedure
2
The remote control will show steady LEDs to indicate:
-Through the three fan speeds the desired humidity
setting threshold between: Low - Medium and High
Humidity threshold selection
