Innova Srl
Page 12
N420220A_ManualeHRC_Rev07.EN
Release the cover from the motor holder by pressing on
the side holes (1) using a small screwdriver (fig. 6).
Fig. 6 Front cover release
Break the shutter provided for the passage of
connections (2), in the case of external connections not
in the trace, fracture the areas provided (3) both on the
motor door and on the cover (fig. 7).
Fig. 7 Cable insertion
Fix the motor holder in correspondence with the drain
hole using screws and plugs (fig. 8).
Fig.8 Motor holder fixing