11
GB
BATTERY SUBSTITUTION
If the display shows “Lo”, replace batteries.
If the scale is overloaded, the display will show “EEEE”.
BATTERIES REPLACEMENT
If the display shows “Lo” replace the batteries.
DISPLAY SYMBOLS
DATA FOR THE DETECTION OF FAT, WATER, MUSCLE, BONE
You must enter your personal details before making the measurement of various
parameters related to the physical form (fat and water).
Press the SET button, the first of 10 users (P1-02-03-04- ... )flashes on the display. If you
want to enter data in this user, confirm with SET, otherwise choose another profile using
the arrow keys and confirm with SET.
After confirming the user to use, by pressing the SET, a man or woman will flash,
select using the arrows and confirm with SET.
Now the Height in cm flashes , enter your height using the arrows and confirm with SET.
Then the age will flash, set the correct value and confirm with SET.
After confirming the last parameter (age), the display will show 0.0 KG and the
user name, for example, P1. To start the measurement, step on the scale. Remain fixed
during the measurement until the data is not detected.
Warning: during the measurement there should not be any contact between the two
feet, calves, shins or thighs. Otherwise, the measurement cannot be performed properly.
Initially, the display will show your weight, then after a few seconds the following
information will be shown one after the other:
Display
Mean
Man
Woman
CM (FT;In)
Height
Age
from 10 to 80
FAT
Fat
TBW
Water
%
Percentage
