38
GB
• To avoid possible damage of the monitor, use only the exclusive AC
adapter that can be purchased from authorized dealers. Other adapter
may damage the blood pressure monitor.
• The AC adapter is used as an isolating means, the AC adapter plug shall
insert into the outlet nearby the operator, make it easy to disconnection
the device from the outlet.
• If long time work, remove the plug after the adapter cools, and prevent
bums.
• Plug the AC adapter into the appropriate voltage outlet. Do not use in a
multi-outlet plug.
• Not to position the blood pressure monitor to make it difficult to operate
the disconnection device( adaptor).
NOTE: The monitor is designed not to draw power from the batteries when
the AC adapter in use.
CAUTION
• Please keep quiet for 5-10 minutes and avoid eating, drinking, alcohol,
smoking, exercising and bathing before taking a measurement. All these
factors will influence the measurement result.
• Remove any garment that fits closely to your upper arm.
• Always measure on the same arm (normally left).
• Measurements should be taken regularly at the same time of each day, as
the blood pressure varies even during the day.
• Any effort to support the arm during measurement may increase the
measured blood pressure.
• Make sure, you are in a comfortable, relaxed position with leg-uncrossed,
feet flat on the floor, back and arm supported, middle of the cuff at the
level of the right atrium of the heart and do not move or constrict your
muscles and talk during measurement. Use a cushion to support your arm
if necessary. Keep position in normal use.
• If the arm artery lies lower or higher than the heart, a false reading will be
obtained.
• A loose or open cuff causes false readings.
• With repeated measurements, blood accumulates in the arm which can
lead to false reading.
• Consecutive blood pressure measurements should be repeated after 1
minute pause or after the arm has been held up in order to allow the
accumulated blood to flow away.
