Innocenti ICONTFT60, User Manual

Page: 9 / 40

WARNING:
Read the instructions before using the appliance
When the power is switched on at the isolation switch, the hob will beep once and the display will be blank for a
few seconds before 3 dots appear indicating that the software is initiating. Once the process is complete the
display will show an initial date and time, the appliance is now ready for system set up.
Induction Cooking
Induction cooking is a safe, advanced and efficient cooking technology. It works by generating electromagnetic
radiation in a suitable pan that then cooks the food. There is no direct heat from the glass, though the surface will
get hot due to convection heating from the pan itself; this is perfectly normal.
My new induction hob makes a lot of different noises. Does this mean that it is faulty?
•
Crackling sounds. These noises can normally be attributed to the pans and the different materials used in their
construction. The pan base will be a composition of different materials which will expand at different rates as the pan
heats.
•
Clicking noises. These are normally created by the electronic components within the appliance as they switch
on and off.
•
Whistling noises. These can be caused when one or more cooking zones are in operation at a high power
level and as a result of the cookware being constructed of different materials.
•
Humming noises. These noises can be created when a high power level is selected i.e. boost function.
Noises related to high power levels will reduce as the pans heat to temperature and the power level is reduced.
•
Hissing/humming noises. These noises can be normally heard when the hob’s cooling fan is in operation.
All of the noises listed above are quite normal and do not indicate a fault. Contact Customer Services shown
in the Care & maintenance section below if you need further guidance.
Cookware
Only use cookware with a base suitable for induction cooking. Look for the induction symbol on the packaging
or on the bottom of the pan.
•
You can check whether your cookware is suitable by carrying out a magnet test. Move a magnet towards the
base of the pan. If it is attracted, the pan is suitable for induction.
•
If you do not have a magnet:
1. Put some water in the pan you want to check.
2. Select any zone, the default power level will be set at 5 which is indicated on the display. Place your pan on the
selected zone and if a question mark (?) and the words “Cookware not detected” is displayed then the pans are not
suitable for this appliance.
Do not use cookware with jagged edges or a curved base.
Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the
cooking zone. Use pans whose diameter is as large as the graphic of the zone selected. You will get maximum
efficiency by matching the pan size to the cooking zone and ensuring it is central. Small pans less than 1
2
cm
may not be detected.
Before you start
9