Controlling a cooker hood remotely
IMPORTANT:
This section is only applicable if you have purchased a cooker hood.
The process for connecting the hood to the hob happens in three stages:
A) Configure the hob to transmit a radio frequency signal.
B) Configure the hood to receive this signal.
C) Lock the connectivity between the two appliances and complete the pairing process.
STAGE A
1. The induction hob must be switched on and showing the Home Screen display before proceeding.
2. Touch the Main Menu key on the Home Screen to take you to the Settings menu. Touch the Connect icon
to initiate the pairing sequence and transmit a radio frequency signal from the hob. Do not touch the Hood
connection button on the hob yet!
IMPORTANT:
To proceed with the connectivity operation, the hood must be switched off at the mains
power switch. Turn on the hood again and complete Stage B and C within two minutes. If connection is not
successful, turn off the hood again, wait for one minute and try again.
STAGE B
1.
2.
When the hood is first switched on, the control panel will blink white in Settings mode.
Touch the Fan Speed Increase icon and Fan Decrease icon together for two seconds on the hood control
panel and both icons will turn orange and the Automatic symbol "A" will appear in the display. The
hood is configured to receive the signal.
Settings
Hood connection
How to connect to hood
Connect
县
(9
Level
0
Use
29
Summary of Contents for ICONTFT60
