Innocenti ICONTFT60, User Manual

Page: 4 / 40

Safety
Caution:
•
The induction hotplate must be installed by qualified personnel or technicians. Please never conduct the
operation by yourself.
•
The hob must not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes dryer,
as the humidity may damage the hob electronics.
•
This hob must not be installed directly above a kitchen drawer used to store cutlery or other metal items
due to the proximity of its magnetic field.
•
Do not attempt to dismantle the appliance, there are no user serviceable parts inside.
•
At the end of its life, the appliance should not be disposed of in household waste; contact your Local
Authority for guidance.
Caution:
•
This hob must be connected to the mains power supply only by a suitably qualified person.
•
Before connecting the hob to the mains power supply, check that:
1.the domestic wiring system is suitable for the power drawn by the hob.
2.the voltage corresponds to the value given in the rating plate.
3.the power supply cable sections can withstand the load specified on the rating plate.
•
To connect the hob to the mains power supply do not use adapters, reducers, or branching devices, as they
can cause overheating and fire.
•
The power supply cable must not touch any hot parts and must be positioned so that its temperature will not
exceed 75°C at any point.
•
The work surface is square and level, and no structural members interfere with space requirements.
•
The work surface is made of a heat-resistant material.
•
If the hob is installed above an oven, the oven has a built-in cooling fan.
•
The installation will comply with all clearance requirements and applicable standards and regulations.
•
A suitable isolating switch providing full disconnection from the mains power supply is incorporated in the
permanent wiring, mounted and positioned to comply with the local wiring rules and regulations. The isolating
switch must be of an approved type and provide a 3 mm air gap contact separation in all poles (or in all active
[phase] conductors if the local wiring rules allow for this variation of the requirements).
•
The isolating switch will be easily accessible to the customer with the hob installed.
•
You consult local building authorities and by-laws if in doubt regarding installation.
•
You use heat-resistant and easy-to-clean finishes
(such as ceramic tiles) for the wall surfaces surrounding the hob.
•
When you have installed the hob, make sure that:
•
The power supply cable is not accessible through cupboard doors or drawers.
•
There is adequate flow of fresh air from outside the cabinetry to the base of the hob.
•
•
•
If the hob is installed above a drawer or cupboard
space, a thermal protection barrier is installed below the base of the hob.
The isolating switch is easily accessible by the customer. The hob should be fixed into the worktop
using the fixing brackets and sealing tape supplied with the appliance. Do not use silicone sealant or
PVA to secure the hob. Doing so will prevent an engineer removing the appliance to facilitate a repair.
4